Oil Additiv - a firm anti-friction additive from Liqui Moly, based on molybdenum disulfide (MoS2),
whose operation and effectiveness have been tested for decades.
The additive is recommended for use in older generation cars (petrol and diesel),
in systems without soot filters. It is recommended to change every time the oil is changed.
 
The engine oil additive Oil Additiv is a colloidal dispersion of a solid lubricant based on molybdenum disulfide (MoS2), in mineral oil, which is fully stabilized with the help of special substances and is intended for use in diesel and gasoline car engines. The additive is fully compatible and miscible with all types of engine oils (mineral, semi-synthetic, synthetic).

FEATURES

• miscible with all types of engine oils
• maintains stability under long-term thermal and dynamic loads
• does not form deposits and does not affect the engine filtering system, does not clog filter pores
• reduces engine wear due to long-term operation and high loading
• protects the engine from damage under extreme circumstances (oil leakage, very high loads, overheating)
• reduces fuel and oil consumption
• increases engine resource
• tested on turbocharged engines and catalysts

TECHNICAL DATA
Base: MoS2 suspension
Color: gray-black MoS2
MoS2 particle size: < 0.3 µ
Solid content: about 3%
Density at 20°C: 0.89 – 0.90 g/cm³ DIN 51757
Viscosity at 20 °C: about 300 mPa*s DIN 51398
Flashpoint: 200 °C DIN ISO 2592
Solidification point: -20 °C DIN ISO 3016
Specifications: complies with 
MIL-M-7866 B,  DEF 2304, CS 2819 
APPLICATION SCOPE
As an anti-wear additive for engine lubricants, compressors, pumps, especially in petrol and diesel car engines.
APPLICATION
Add the additive to the engine oil, calculating 5% (50 ml per 1 l of oil), for motorcycles with a clutch in the oil bath add, calculating 2% (20 ml per 1 l of oil). The mixing of the additive with engine oil occurs on its own, almost immediately