Brake caliper paint K2 Brake Caliper Paint 400ml aerosol

Caliper paint features excellent filling and long-lasting gloss. They are resistant to scratches, impacts, gasoline, chemicals, and weather conditions, protecting against rust and dirt.

Features
Good filling properties
Resistance to gasoline, chemicals, and environmental impact
Long-lasting gloss
Resistance to scratches and impacts
Protects against corrosion
Protects against contamination
Fade protection (UV resistance)
Excellent adhesion

Usage instructions
Read the instructions on the package carefully before use and follow them.
Surface preparation: The surface must be clean, dry, and degreased. Remove peeling old lacquer and rust, then sand the surface. Apply a primer layer, an aerosol primer is suitable. After drying, sand the main layer (paper grade 600).
The surface must be clean, dry, and degreased. The aerosol must be at room temperature. The recommended coating temperature is from 10 to 25°C.
Shake the aerosol for 2 minutes before use and spray a sample.
Spray from a distance of about 25–30 cm.
Apply the paint in several thin layers. Shake the aerosol again before applying the next layer.
After use, clean the valve (invert the aerosol and press the nozzle for about 5 seconds).
Drying time depends on ambient temperature, humidity, and the thickness of the applied paint.