Brake Caliper Paint MOTIP Brake Caliper

Brake caliper paint is known for its excellent filling capacity and long-lasting gloss. It is resistant to scratches, impacts, gasoline, chemicals, and weather conditions, prevents rust formation, and protects against dirt.

Specifications
Good filling properties
Resistance to gasoline, chemicals, and weather conditions
Long-lasting gloss
Scratch and impact resistance
Prevents corrosion
Prevents contamination
Fade protection (UV resistance)
Excellent adhesion

Application Instructions
Carefully read the instructions on the packaging and follow them before use.
Surface preparation: The surface must be clean, dry, and degreased. Remove any flaking old paint and rust, then sand the surface. Apply a primer coat, spray primer is ideal for this. After drying, sand the base layer (paper grade 600).
The surface must be clean, dry, and degreased. The aerosol should be at room temperature. The recommended application temperature is from 10 to 25°C.
Shake the aerosol for 2 minutes before use and spray a sample.
Spray from a distance of approximately 25-30 cm.
Apply the paint in several thin layers. Shake the aerosol again before applying the next coat.
After use, clean the valve (turn the aerosol upside down and press the nozzle for about 5 seconds).
Drying time depends on the ambient temperature, humidity, and thickness of the applied paint.