Anti-corrosion bitumen black mastic - for body and bottom protection - anti-corrosion agent - for pneumatic gun 1000ml

High-quality aerosol anti-corrosion composition for treating the body and visible parts of the car
body and visible parts. Product description. Re-sprayed on all painted and lacquered
Surfaces remain elastic. Very good adhesion. Weather-resistant. Resistant to weak acids and alkalis.

Re-spraying: after 2 hours. Method of application: Carefully read the instructions before use.
on the packaging and follow them accordingly. Before processing, remove the old lacquer and follow the instructions.
Remove all old paint and rust and sand the surface.
Treatment: The surface must be clean, dry, and free from grease. The spray should be at room temperature.
The optimal processing temperature is between 15 and 25 °C. Shake the spray for 2 minutes and spray a sample before use.
The distance to the treated surface should be approximately 25-30 cm. 
After drying, without sanding, reapply the spray to all painted and lacquered surfaces.
After use, clean the valve (turn the spray upside down and press the nozzle for about 5 seconds).
Drying time depends on ambient temperature, humidity, and thickness of the applied varnish.