Brake Caliper Paint K2 Brake Caliper Paint 400ml aerosol

Caliper paint features excellent filling capacity and sustained gloss. It is resistant to scratches, impacts, gasoline, chemicals, and weathering, prevents rust formation, and protects against dirt.

Characteristics
Good filling properties
Gasoline, chemical, and weather resistance
Durable gloss
Scratch and impact resistance
Prevents corrosion
Prevents contamination
Fade protection (UV resistance)
Excellent adhesion

Application Instructions
Before use, carefully read and follow the instructions on the package.
Surface Preparation: The surface must be clean, dry, and degreased. Remove flaking old varnish and rust, then sand the surface. Apply a primer layer, a can spray primer will be perfect for this. After drying, sand the base layer (sandpaper grit 600).
The surface must be clean, dry, and degreased. The aerosol should be at room temperature. Recommended application temperature from 10 to 25°C.
Shake the aerosol for 2 minutes before use and spray a sample.
Spray from a distance of approximately 25-30 cm.
Apply paint in several thin layers. Shake the aerosol again before applying the next layer.
After use, clean the valve (turn the aerosol upside down and press the nozzle for about 5 seconds).
Drying time depends on the ambient temperature, humidity, and thickness of the applied paint.