Brake Caliper Paint K2 Brake Caliper Paint 400ml aerosol

Caliper paint is distinguished by excellent filling ability and long-lasting gloss. It is resistant to scratches, impacts, gasoline, chemicals, and weather conditions, prevents rust formation, and protects from dirt.

Characteristics
Good filling properties
Resistance to gasoline, chemicals, and weather conditions
Long-lasting gloss
Scratch and impact resistance
Prevents corrosion
Prevents contamination
Fade protection (UV resistance)
Excellent adhesion

Instructions for use
Before use, carefully read the instructions on the packaging and follow them.
Surface preparation: The surface must be clean, dry, and degreased. Remove any flaking old varnish and rust, then sand the surface. Apply a primer layer, an aerosol primer is ideal for this. After drying, sand the base layer (paper grade 600).
The surface must be clean, dry, and degreased. The aerosol should be at room temperature. The recommended application temperature is from 10 to 25°C.
Shake the aerosol for 2 minutes before use and spray a sample.
Spray from a distance of about 25-30 cm.
Apply the paint in several thin layers. Shake the aerosol again before applying the next layer.
After use, clean the valve (turn the aerosol upside down and press the nozzle for about 5 seconds).
Drying time depends on ambient temperature, humidity, and the thickness of the applied paint.