Brake Caliper Paint K2 Brake Caliper Paint 400ml aerosol

Caliper paint features excellent filling capability and long-lasting gloss. It is resistant to scratches, impacts, gasoline, chemicals, and weather conditions, prevents rust formation, and protects against dirt.

Characteristics
Good filling properties
Resistance to gasoline, chemicals, and weather conditions
Long-lasting gloss
Resistance to scratches and impacts
Prevents corrosion
Prevents contamination
Fade protection (UV resistance)
Excellent adhesion

Instructions for use
Read the instructions on the packaging carefully before use and follow them.
Surface preparation: The surface must be clean, dry, and degreased. Remove any flaking old lacquer and rust, then sand the surface. Apply a primer layer, a spray primer is ideal for this. After drying, sand the base layer (paper grade 600).
The surface must be clean, dry, and degreased. The aerosol must be at room temperature. The recommended application temperature is from 10 to 25°C.
Shake the aerosol for 2 minutes before use and spray a sample.
Spray from a distance of approximately 25-30 cm.
Apply the paint in several thin layers. Before applying the next layer, shake the aerosol again.
After use, clean the valve (turn the aerosol upside down and press the nozzle for about 5 seconds).
Drying time depends on ambient temperature, humidity, and thickness of the applied paint.