PROFESSIONAL LEATHER REPAIR KIT - Leather, Vinyl, and Faux Leather Repair and Restoration Kit
| Product Code: | ADDA61809 |
-
12.00€
Related products
Leather Repair. Paints. Fillers
Black paint for leather, synthetic leather MOTIP Leather Paint - aerosol 200ml
9.00€
Leather Repair. Paints. Fillers
White MOTIP Leather Paint for leather and synthetic leather - aerosol 200ml
9.00€
Leather Repair Kit – convenient and easy-to-use kit for restoring surfaces made of genuine and artificial leather and vinyl. It can be used for repairing car interior upholstery and panels, as well as for home use when repairing furniture, leather clothing, footwear, bags and suitcases, haberdashery, as well as boat, motorcycle and other motor vehicle seats, convertible tops, and more.
Features:
- Restores any holes, cracks, cuts, burns on leather and vinyl surfaces, as well as dents on the latter;
- The kit includes heat-resistant repair compounds in seven colors, allowing you to mix and obtain any shades. The shade corresponding to the treated surface can be selected using the included chart;
- The kit includes a set of three sheets of heat-resistant paper with the most common leather and vinyl textures;
- Desired results are achieved without significant costs.
Application:
1. Prepare and clean the damaged area.
Clean the damaged area using a household vacuum cleaner. Ensure the area is dry before starting. Carefully trim frayed areas and excess threads with scissors or a knife, as well as charred edges. Remove all charred material for burn damage. Make the damage area edges smooth – you should end up with a hole in the material with straight edges.
2. Insert the fabric backing under the damaged area. Use a spatula to insert the fabric backing under the hole made in step 1. For repairing large holes more than 6 mm, cut the fabric backing slightly larger than the hole. Smooth the fabric backing with a spatula. Glue the backing on the inside with vinyl adhesive. Dry with a hairdryer.
3. Choose heat-resistant paper with a texture that most closely matches the damaged surface texture. On the back of the chosen heat-resistant paper, outline the damaged area. This will help correctly position the heat transfer tool in step 8.
4. Fill in the deep damage. For deep damages, such as on a vinyl dashboard, use clear vinyl adhesive with filler and a spatula to level the damaged area to the original surface. The adhesive will slightly shrink when drying, leaving a void that will be subsequently filled with color repair compound.
5. Using the shade selection chart or by trial and error, determine the set of repair compounds that will create the needed shade when mixed. Mix this set in the required amount in the mixing container to obtain the desired shade. Check the shade match by rubbing a small amount of the mixture on an undamaged surface, then remove it with a cloth.
6. Apply the repair mixture. Once the vinyl adhesive has dried, use a spatula to evenly and gently apply the mixture to the damaged area. Wipe off any excess around the hole or damage. Do not overlap the damaged area.
7. Place the textured heat-resistant paper on the repair zone. Stick it over the repair mixture, ensuring the outlined contour is directly over the damaged area. Do not move it. If repairing on a vertical surface, secure the paper with tape at the top.
8. Heat treatment. This is a very important step in the repair process. Turn on the iron and let it heat up to a high temperature for at least four minutes. Place the tip of the heat transfer tool directly on the iron and let it heat for a few minutes. Then press the tool to the working contour on the heat-resistant paper and with circular motions, gently press down over the repair area for 20-30 seconds. Remove the heat-resistant paper from the repaired area.
The set includes:
Heat-resistant repair compound in seven colors (black, blue, green, red, brown, white, and yellow) - 7 pcs.
Vinyl adhesive - 1 pc.
Fabric backing - 1 pc.
Set of heat-resistant papers with three different textures - 3 pcs.
Shade selection chart - 1 pc.
Spatula - 1 pc.
Mixing container - 1 pc.
Heat transfer tool - 1 pc.