Epoxy Putty - two-component modeling clay Mannol 56gr  EpoxidKitt Stahl+Metall 
Epoxidkitt – a two-component super putty based on epoxy resin for quick repairs with a long-lasting effect. Fills holes, scratches, cracks, cavities, and dents. Easily mixed by hand and takes any shape. Designed for repairing surfaces made of any metals and alloys (steel, cast iron, aluminum, copper, brass, bronze, magnesium, tin, lead, etc.) and any plastics. It can be used to stop leaks in fuel tanks, radiators, oil pans, barrels, pipes, etc. Applicable underwater. Retains its properties up to 260 °C.

Properties:
- excellent resistance to chemical and mechanical effects;
- quickly hardens under any conditions, even underwater;
- durable;
- after final hardening, any mechanical treatment is possible with chip removal (drilling, sawing, threading, scraping, grinding, etc.), followed by painting or varnishing;
- does not contain asbestos and is an electrical insulator;
- can be used for glass, ceramics, concrete, wood, etc.

Application: Thoroughly clean the surface from old paint and other coatings, contaminants, grease, and oil deposits. Degrease using 9691 MANNOL Brake Cleaner. Dry it. For best adhesion, the surface can be roughened with sandpaper. Puttying can be done at any temperature and humidity, but the optimal temperature is from +10 °C to +30 °C and 50-60% air humidity. Squeeze out of the tube and cut the required amount. Knead by hand until a homogeneous warm mass is obtained. Smooth out and remove excess with a spatula. Hardening begins after 15 minutes. Full hardening occurs after 1 hour. When applying underwater or on an oily surface, the composition must be pressed with a spatula until hardening begins.