Mannol Belt Tensioner Anti-Squeak Agent 9897 200 ml.
| Brand: | MANNOL |
| Product Code: | 9897 |
-
3.00€
Related products
Belt Tensioner – means for caring for drive belts: quickly, safely, and effectively eliminates extraneous noises (squeaks, whistles, etc.) and belt slippage, cleans them from contamination, removes oil traces, restores elasticity, prevents drying and cracking. Used for drive belts of generators, air conditioners, power steering, and other units.
Properties:
- Reduces wear on belts and pulleys, prevents their aging, thereby extending their service life;
- Increases the efficiency of the belt drive;
- Reduces noise during engine operation;
- Especially effective for eliminating slippage of old belts when replacement or tensioning is not possible;
- Suitable for V-belts and multi-V belts, not suitable for flat belts;
- For belts made of leather, various fabrics with rubber or balata impregnation, chemical fibers, nylon, polyurethane, and other synthetic materials;
- Regular use of the product extends the service life of belts by 1.5–2 times.
Application:
Stop the belt drive. Spray a small amount of the product from a distance of approximately 20 cm onto the pulley on the side surfaces of the belt and/or directly onto the side surfaces. Rotate the belt drive at least one full belt revolution so that the product is evenly distributed over its surface. Repeat the procedure one or more times if you want a thicker protective layer. After applying the last layer, leave to act for 10 minutes before restarting the engine.
Properties:
- Reduces wear on belts and pulleys, prevents their aging, thereby extending their service life;
- Increases the efficiency of the belt drive;
- Reduces noise during engine operation;
- Especially effective for eliminating slippage of old belts when replacement or tensioning is not possible;
- Suitable for V-belts and multi-V belts, not suitable for flat belts;
- For belts made of leather, various fabrics with rubber or balata impregnation, chemical fibers, nylon, polyurethane, and other synthetic materials;
- Regular use of the product extends the service life of belts by 1.5–2 times.
Application:
Stop the belt drive. Spray a small amount of the product from a distance of approximately 20 cm onto the pulley on the side surfaces of the belt and/or directly onto the side surfaces. Rotate the belt drive at least one full belt revolution so that the product is evenly distributed over its surface. Repeat the procedure one or more times if you want a thicker protective layer. After applying the last layer, leave to act for 10 minutes before restarting the engine.